How To Install Ivytress?
How to Install & Maintain Your Ivytress Zippered Mattress Protector
5-Minute Setup | 100% Waterproof Protection | OEKO-TEX® Certified
🛠️ Tools You’ll Need
Blunt-tip scissors (prevents fabric snags)
Non-slip gloves (included in box)
Smartphone (scan QR code for AR installation demo)
🚀 4-Step Installation (Under 5 Minutes)
Step 1: Pre-Installation Check
✅ Retain: Springs | Memory foam ≥2" thick | Latex layers
❌ Remove: Worn fabric | Damaged padding >5 years old
Step 2: Precision Cutting
Align with mattress stitching lines
Use TemplateGrid™ markers (printed on protector edges)
Cut with 1.5" margin from bed frame
Step 3: Secure Zipper System
Start at footboard
Engage Auto-Seal™ teeth (audible click confirms alignment)
Verify airtight closure with BubbleCheck™ test:
Press center – if wrinkles smooth out in 8 secs, seal is complete
Step 4: Final Adjustments
Tuck excess fabric under mattress
Attach corner straps (prevents shifting)
🔧 Troubleshooting Common Issues
| Problem |
Solution |
| Zipper resistance |
Apply silicone lubricant (included in care kit) |
| Mid-bed wrinkles |
Reactivate ThermoFit™ with hair dryer (low heat, 6" distance) |
| Corner gaps |
Use GripPad™ adhesives (washable/reusable) |
🧼 Scientifically Validated Care Protocol
Washing Schedule:
Households with pets/allergies: Every 21 days
Standard use: Every 90 days
Machine Settings:
| Cycle |
Temp |
Detergent |
Dry Method |
| Delicate |
86°F/30°C |
pH-neutral only |
Air dry <6 hrs |
Pro Tip: Insert FreshCore™ scent tabs (hypoallergenic) during storage
⚠️ Critical Do’s & Don’ts
✅ Do:
Rotate protector 180° every 6 months
Use mattress pad as base layer (extends lifespan 40%)
❌ Don’t:
Iron or dry clean
Exceed 12 lbs pressure during spot cleaning
🔍 Warranty & Support
10-Year Limited Warranty: Covers zipper defects & seam separation
24/7 Sleep Experts: Support@ivytresss.com
Instant Replacement: File claims via Online Portal