When it comes to sleep, your comfort and protection are equally important. Whether you're dealing with allergens, dust mites, bed bugs, or just want to refresh an old mattress, the Ivytress Mattress Encasement is the ultimate solution. It transforms your worn-out bed into a hygienic, safe, and like-new sleeping surface.
But how exactly do you install the Ivytress encasement properly? In this step-by-step guide, we’ll walk you through the entire process—no tools required. Just 10 minutes and a bit of space, and your bed will be fully protected and revitalized.
Why Install a Mattress Encasement?
Before diving into the installation steps, it’s helpful to understand why a mattress encasement is worth the investment:
Bed Bug Protection: Ivytress encasements are 100% bed bug-proof, tested in lab and field conditions.
Allergen Barrier: Blocks dust mites, pet dander, and pollen from embedding into your mattress.
Preserve & Refresh Old Mattresses: Gives your mattress a second life, especially when paired with our Ivy Topper.
Removable & Washable: Easy to clean, unlike permanent mattress fabric.
Ready to begin? Let’s install.
Step 1: Prepare Your Mattress Area (Time: 2-3 minutes)
First, create a clean and open workspace around your bed. This step makes installation easier and ensures your encasement fits perfectly.
Checklist:
Remove all bedding (sheets, pillows, toppers, and blankets)
Vacuum the mattress to remove dust and crumbs
If you suspect bed bugs, inspect the seams and corners using a flashlight
💡 Pro Tip: Measure your mattress thickness before ordering. Ivytress products are custom-sized for optimal fit, so measure from bottom to top—including any pillow-top or comfort layer.
Explore our size chart
Step 2: Unbox and Identify the Encasement Components (Time: 1 minute)
Your Ivytress encasement includes:
1 Mattress cover with full zipper wrap-around
1 Set of installation instructions (QR code included)
Optional: Elastic corner bands or topper layering pieces (depending on product version)
Lay the encasement flat with the zipper side facing up. Make sure you’re installing it in the right orientation—check for labels indicating top and bottom.
Step 3: Slip It Over the Mattress (Time: 3-5 minutes)
This is the core step.
Unzip the encasement completely. This allows it to open like a clamshell.
Lift one end of your mattress slightly, and begin sliding the bottom panel of the encasement underneath.
Pull the fabric gently to adjust and smooth out corners.
Lower the mattress onto the encasement base, then pull the top half over like a fitted lid.
⚠️ Don’t rush—tight corners require a gentle stretch. Avoid pulling too aggressively to prevent tearing.
Step 4: Zip It Shut with the SecureSeal System (Time: 1 minute)
Once both halves are in place:
Locate the SecureSeal zipper and start zipping from one end.
Zip all the way around the mattress until fully enclosed.
Double-check that the zipper slider is covered by the built-in flap—this is a critical bed bug prevention feature.
🔒 The Ivytress SecureSeal zipper is designed to eliminate even the smallest entry points (less than 0.1mm), which are smaller than a bed bug!
Step 5: Re-Make Your Bed and Maintain (Time: 2-3 minutes)
You’re almost done! Just follow these final steps:
Add your favorite Ivy Topper or comfort layer for extra plushness.
Put on clean sheets and bedding.
Tuck in any excess fabric and inspect corners for wrinkles or gaps.
Ongoing Maintenance Tips:
Wash your encasement every 3 months (machine washable, gentle cycle)
Vacuum around the bed weekly
Check zipper integrity once a month
If needed, remove the cover for full cleaning and reinstallation (takes ~10 mins)
Why Choose Ivytress Over Standard Covers?
Not all mattress encasements are created equal. Here's how Ivytress compares:
| Feature |
Ivytress Mattress Encasement |
Standard Covers |
| Fabric Strength |
400D nylon, rip-resistant |
Thin plastic or low-D polyester |
| Zipper Design |
SecureSeal 360°, anti-bug lock |
Standard zipper, prone to gaps |
| Comfort |
Breathable, heat-regulated |
Often traps heat |
| Customization |
Tailored fit by thickness |
One-size-fits-all fit, often loose |
| Aesthetics |
Modern, neutral fabric tones |
Crinkly or hospital-style look |
👉 Learn more about the DIY Mattress Zippered Pad Series
What Customers Are Saying
“The installation was easier than I expected. Took less than 10 minutes and instantly made my mattress feel brand new.” — Allison W., Airbnb Host
“I had a mild bed bug issue. With the Ivytress encasement, they were gone in weeks and haven’t returned. Life saver!” — Jermaine P., Brooklyn, NY
“I used to wake up sneezing—now I sleep like a baby. Highly recommend this for allergy sufferers.” — Cynthia L., Austin, TX
Final Thoughts: 10 Minutes to Long-Term Protection
The Ivytress mattress encasement doesn’t just shield your bed—it transforms it. From allergy relief to bug protection to aesthetic renewal, installing your encasement is the first step toward a healthier sleep environment.
And the best part? You can do it yourself in under 10 minutes.
🛒 Shop the Ivytress Mattress Encasement Now
Frequently Asked Questions (FAQ)
Q: Can I install this alone?
A: Yes! While having a second person helps, it’s designed for solo installation.
Q: Is it noisy like plastic covers?
A: Not at all. Ivytress uses quiet, breathable fabric.
Q: Will it fit pillow-top or deep mattresses?
A: Yes, just select the appropriate depth using our size chart.
Q: Is this a permanent cover?
A: No, it’s removable and washable for ongoing hygiene.